background image

Use the vehicle on generally level ground ONLY!

caution

About Your New Vehicle

    Thank you for your purchasing our products, we 

wants your child to enjoy this product for years to 

come. Keep these points in mind as you read this guide:

FOR THE SAFETY OF YOUR CHILD, PLEASE READ ALL WARNINGS AND 
ASSEMBLY/USE INSTRUCTIONS. KEEP THIS GUIDE FOR FUTURE REFERENCE.

•  

ADULT ASSEMBLY REQUIRED

. The product contains small parts, which are for 

adult assembly only. Keep children away when assembling.
•  Always remove protective material and poly bags and dispose before assembly.

WARNING!

Suitable age: 

37~96 months

 

6V4AH x1(Fuse: 7A) or 6V7AH x1(Fuse: 7A) or 6V10AH x1 (Fuse:7A)

Load Capacity: 

Under 30KGS 

Size of car:

118 x 81 x 67 CM

 Speed: 

3KM/H

3~5KM/H

 Power way: 

Charging type 

Charger: 

Input: depend on local voltage

Output: DC 6V500mA or DC6V1A 

             or DC12V1A

Average 
battery life: 

Approximately

 

300 times

 Charge time: 

8-12 Hours 

Battery & 
Fuse:  

1WD

2WD

1WD

1WD

2WD

2WD

IMPORTANT

WARNING

This label means the information or assembly for 

One Wheel Drive

 version 

ONLY!

This label means the information or assembly for 

Two Wheels Drive

 version 

ONLY!

CHOKING HAZARD

 - Small parts. 

Not suitable for children under 37 
months.

VER:SMS-XX-EN-111212

6V7AH x1 (Fuse: 10A)

VER:SMS-JE118-EN-120503

VER:SMS-JE118-EN-RC-120503

Содержание JE118




















Отзывы: