Play Mechanix amc The Walking Dead, Руководство по установке и эксплуатации

Страница: 23 / 49

Page 23
Walking Dead© Game Software copyright 2016 PlayMechanix™ Inc. All rights reserved.
Hard Drive Recovery
Symptoms requiring hard drive recovery include:

File Test reports bad or missing files

Game fails to finish loading during startup

After resetting the AC power, an error is reported

You are prompted to insert a boot DVD

Erratic Game or Attract Mode

A screen indicating Data Files Corrupted
C
OMPUTER
The computer contains sensitive components, including a hard drive. Do not handle roughly. Call your distributor
before servicing its internal components. Ask about warranty information as it relates to the PC.
Do not use the PC on/off switch. Turn AC power on or off with the cabinet power switch.
DVD Restore
1. With game and PC on, insert recovery DVD, marked as Disc 1, into DVD-ROM drive tray.
2. Close tray and Turn cabinet AC power switch to OFF.
3. Wait 30 seconds, then turn AC power switch to ON. Recovery begins automatically.
If recovery fails to begin, check that disc is seated properly in DVD-ROM drive tray.
4. Initial software loading may take several minutes. Check progress periodically.
Do not interrupt power or reset the game during recovery.
5. At some point, the game will eject Disc 1 and prompt you to insert Disc 2 .
6. Swap discs and close the tray.
Do not interrupt power or reset the game.
7. When software has finished loading, a message indicates that restore is complete.
8. Remove DVD restore disc and turn cabinet power switch to OFF.
9. After 30 seconds, turn cabinet power switch to ON.
10. After game restarts, the game will proceed through the Setup Wizard with factory defaults.
Flash Drive Restore
1. Turn AC power switch to OFF.
2. Connect USB flash drive to an open USB port on the PC.
3. Turn AC power switch to ON.
4. Initial software loading may take several minutes. Check progress periodically.
Do not interrupt power or reset the game during recovery.
5. When software has finished loading, a message indicates that restore is complete.
6. Turn cabinet power switch to OFF and disconnect USB flash drive.
7. After 30 seconds, turn cabinet power switch ON.
8. After game restarts, the game will proceed through the Setup wizard with factory defaults.