PT-DVL308C2 On-Camera Video LED Light - LED Dual Color
11
Understanding the remote control
Note the following when using the remote control:
•
Pressing the (power) button on the remote control only
activates or deactivates the LED groups. It does not turn off
the video light. You cannot turn on the video light with the
remote control.
•
You can control six LED groups (A through F) and select one of
16 channels. Set the group and channel on the remote control
the same as the video light.
•
Press the + and - buttons to adjust the color temperature.
Installing batteries in the remote control
1
Turn your remote control over, then open and remove the
door to the battery compartment.
2
Insert two (2) “AAA” size batteries into the battery
compartment. Make sure that you match the + and – symbols
on the batteries with the + and – symbols in the battery
compartment.
3
Reinstall and close the battery compartment door.
Caution
Follow these precautions when using batteries in this device:
- Use only the size and type of batteries specified.
- Make sure that you follow the correct polarity as indicated in
the battery compartment when installing batteries. Reversed
batteries may cause damage to your remote control
- Do not mix different types of batteries together (for example,
alkaline, rechargeable, and carbon zinc), or semi-used batteries
with fresh ones.
- If your remote control is not to be used for a long period of
time, remove the batteries to prevent damage or injury from
possible battery leakage.
- Do not throw batteries into a fire. Dispose of used batteries as
hazardous waste.
PT-DVL308C2 15-0205_MAN_V2_ENG.fm Page 11 Thursday, April 23, 2015 9:42 AM
