STEP 3
Attach one lower leg section to each corner of the
frame as shown.
STEP 4
Insert the backrest into the frame of the sliding chair
until the spring tension buttons engage in the hole.
STEP 5
Adjust legs so they will best accommodate floor
heights and desired height for client. Legs lengths
are adjustable in half-inch increments by pushing the
spring tension buttons. Ensure that seat is level from
front to back and also side to side.
OPERATION
STEP 1
Push the gray button straight in engage the chair sliding function. Slide the chair along the
horizontal rails until it locks into place at the end of the travel outside of the tub.
STEP 2
To rotate the chair, push down on the red lever. Chair will lock into place every 90° of rotation.
Rotate the chair so that it is facing into the room and toward the user. Have user sit onto chair
and securely fasten safety belt around hips.