Platinum CCTV Surveillance Solutions
®
Keychain/Key Fob DVR Hidden Camera Manual
©2011 Platinum CCTV Surveillance Solutions. All Rights Reserved
2
Video DVR Overview:
The KC-DVR1080P keychain/key fob
hidden spy camera DVRs are designed to
provide video/audio recording onto a
microSD card that can be inserted in the
slot on the back of the device. The video
can be transferred to a PC using a
standard micro USB cable (included) or
by removing the microSD card and
inserting it into a card reader in a PC.
These keychain DVRs have a high
resolution 12 MegaPixel image sensor
for great color video snapshots and
video. The KC-DVR1080P model records
video in 1920x1080 resolution at 15fps.
The built-in rechargeable battery can
provide up to 90 minutes video recording. Battery can be charged by plugging into a PC over micro-
USB cable (included).
DVR Operation Instructions:
The KC-DVR1080P keychain/key fob hidden nanny DVR spy camera is hidden inside the body of a
standard looking keychain. On the keychain side of this device is a microSD card slot and micro USB
connector to allow you to plug it into a PC for connection. On the front of the keychain DVR camera,
you will find 3 buttons. The ‘M’ button allows you to control the recording mode of the camera, the
Power button will allow you to power on or off the recorder, and the LED Light button will allow you
to use the key fob as a flashlight at night.
Power On and Enter Standby Mode:
To power on the DVR, Press the power button. The yellow and red led indicators will come on, then
once it enters standby mode, the red light will say on solid. Find instructions below on starting
recording once in Standby Mode. To power off the DVR, long-press the Power button again and the
LEDs will go out, letting you know that the DVR has been powered off.
Video Recording:
After the DVR is in standby mode, press the ‘M’ button and hold for 2-3 seconds. The Yellow LED will
flash 3 times fast then will go out. The camera will now be recording video and audio in AVI format
onto the microSD card. It will record 5 minutes per file, and will automatically create a new file at the
end of each 5 minutes. Press the ‘M’ Button again to stop recording and return to Standby-mode.
If the battery runs low, the camera will automatically close the current file prior to powering down.
Do NOT remove the SD card while recording is occurring otherwise corruption of data may occur,
leaving unreadable files.
