Platin W-30C, Руководство пользователя

Страница: 12 / 21

Remote Control
Open the battery door on the back of the remote and insert 2 AAA alkaline batteries. The polarity (+/-) is
marked on the inside of the battery compartment. The remote functions are listed in Figure 3.
Figure 3. Remote control:
Set up and Operation
NOTE: For first time set up, the following must be done in the correct order.
.
1. Make sure your TV set is on and tuned to the proper input for the Audio Hub.
2. Plug the power cords into the speakers and subwoofer. Then plug the power cords into a
110V, 60 Hz AC wall outlet. You need press the ‘Associate’ button on back panel of the
speaker until you hear the test tone. The Subwoofer is different - there is no test tone. Also you
should see the “Network Link” LED lights on the back panel of the speakers flashing fast.
3. Plug the Audio Hub AC adapter into the back of the hub and plug the power brick into a 110V
AC, 60 Hz wall outlet. Now the red LED on the front panel should light. Then power on the hub
using the remote control or the power button on the top of the Audio Hub.
4. The speakers and the hub will wirelessly find each other and link. This process may take
several seconds. The red LED should be off and 2 lines of white LEDs should be on. After