Installation | Assembly Instructions
37
Cooling Pad | Installation and Operation Guide Rev B | Doc P/N: 080205039E
Step 5: Preparing Upper Frame
46
16
15
1.
Apply RTV silicone onto
the inner surface of the
gutter joints (16)
2.
Connect two gutter sections (15)
together using a gutter joint, and attach
using self-drilling screws (46)
19
3.
Push the edges of the diffuser (19)
inwards, place the diffuser into the
gutter, and release the edges so that
they insert into the gutter edges
19
15
NOTE:
To facilitate assembly, the parts in
steps 5 and 6 are placed upside-down
WWW
