Installation | System Unpacking
22
Cooling Pad | Installation and Operation Guide Rev B | Doc P/N: 080205039E
3.2 System Unpacking
Open the system package and verify that all the parts listed in the
BOM are located in the package and are intact. If any part is missing
or damaged, contact Plasson.
3.3 Bill of Materials (BOM)
The following table displays the list of parts required to assemble
a standard section of the cooling pad system:
ID #
P/N
Description
QTY.
1
02386717
CPAD RESERVOIR CHANNEL SUPPORT
18
(1)
2
02310516
DIN 933 M8X80 SCREW 10.9 ZINC PLATED
--
(1)(4)
3
02323099
DIN 934 M8 NUT ZINK PLATED
--
(1)(4)
4
02386711
CPAD RESERVOIR CHANNEL END ABS
1
5
02386709
CPAD RESERVOIR CHANNEL PVC (3M)
5
(1)
6
02386710
CPAD RESERVOIR CHANNEL COUPLER ABS
4
(1)
ID #
P/N
Description
QTY.
7
02386712
CPAD PAD SUPPORT TRAY PVC (3M)
4
(1)
8
050400032
TEE-CEMENT PVC 32
2
9
050302032010 ADAPTOR SOCKET M.F. 32-1" CEM-THR
2
10
051701010
THREADED PLUG PVC 1"
2
11
11350032
ONE NUT VALVE, CEMENTED 32MM
2
12
05000033
PVC CEMENTING PIPE 32MM - PN10 (M)
2.5
13
02386663
PVC PIPE 32MM PERFORATED FOR COOL PADS
4
14
050402032010 TEE THR-CEM PVC 32-1"
2
15
02386101
GUTTER FOR COOL PADS AL. 150MM 1.4MM (6M)
2
(1)
16
02386107
GUTTER JOINTS FOR COOL PADS AL. FRAME 150MM
1
(1)
17
02386114
COOLING PAD SIDE END CORNER
2
18
02386106
UPPER HOOD FOR COOL PADS 150MM (6M)
4
(1)
19
02386668
PERFORATED PIPE OMEGA WATER DIFFUSER (3M)
4
(1)
20
02386105
LATERAL CLOSING FOR COOL PADS (2M)
2
21
02382004
CPAD COATED PAD H1800XL600XW150MM 45X15DEG
20
(3)
22
02386111
DISTRIBUTION PAD L600XH30XW150MM
20
23
02386713
CPAD MAINTENANCE LID SS
2
24
02386715
CPAD CLEANING HOLE D.80 ABS
1
25
02386716
CPAD CLEANING HOLE PLUG D.80 ABS
1
26
02386708
CPAD SIDE FRAME LOWER FIXATION
2
27
02386257
LEVEL VALVE FV34 - 180 - PP350MTP
1
NOTE:
Unpack the system in a clean and dry area
NOTE:
Quantity is per 12 meters of cooling pad length
WWW
