Introduction | Water Circulation Subsystem
12
Cooling Pad | Installation and Operation Guide Rev B | Doc P/N: 080205039E
2.3 Water Circulation Subsystem
The water circulation subsystem
operates as follows:
5.
Water returns to the
pump from the
The maintenance valve remains
open during normal operation
3.
A bypass valve allows water to flow back
to the reservoir, thus regulating the amount
of water which flows to the cooling pads
NOTE:
If needed, a hard water treatment filter
and water filter can be installed on the
water inlet pipe (not included)
A float valve controls water entry
into the reservoir and maintains
water level in the reservoir
1.
Water supply connects
to the reservoir through a
control float valve
2.
Water is pumped
out of the reservoir
4.
Water is filtered before entering the
. Pressure gauges
indicate when the filter needs maintenance
WWW
