Plantronics RD-1 POD, Быстрый старт

Страница: 2 / 3

See the user documentation included with the headset for further installation and
product information.
Note: The RD-1 POD plus LD hookswitch control removes any requirement to attach the
telephone handset to the headset base.
imPORtant Safety infORmatiOn
Please read the following instructions before use:
• The RD-1 POD is suitable for indoor use only.
• Use only with Plantronics CS50, CS60, CS70 and Plantronics Voyager 510S headsets.
• Do not spill liquid of any type on the product.
• Do not immerse in any type of liquid.
• To reduce the risk of electrical shock, do not disassemble this product yourself.
• Keep all products, cords, and cables away from operating machinery.
USing Ring Detect anD call
anSweR/enD fROm the heaDSet
The headset will receive a ring alert signal from the headset base when the phone is
ringing. To answer the call, press the Call Control button. To end the call, press the Call
Control button again. The Call Control button can also be used to take the phone off-
hook when placing a call.
waRRanty anD SeRvice
• Plantronics guarantees the satisfactory condition of the equipment with regard to
manufacturing and material defects for 2 years from the date of purchase. (Please
retain the original receipt and refer to the Limited Warranty Terms and Conditions,
available at: www.plantronics.com/warranty, for warranty details and requirements).
• This product should be installed and used in accordance with the instructions
detailed in this Quick Start Guide.
• This does not affect your statutory rights.
Connect the audio cable included with and pre-attached to the headset base to
the headset port on telephone.
Connect the RD-1 POD cable to the headset base as shown; peel the adhesive
off the back of the RD-1 microphone and attach to the telephone speaker.
welcOme/infORmatiOn
This Quick Start Guide provides information for installation and use of the RD-1 Ring
Detect POD. The RD-1 POD is designed for use with phones that also support native
“load detect” (LD) headset hookswitch control and works with Plantronics CS50, CS60,
CS70, and Voyager 510S wireless headset families.
Once connected, the RD-1 POD will send a ringer alert signal to the headset anytime
the phone rings, anywhere within a headset’s wireless range. LD hookswitch control, for
telephones that support it, enables on/off-hook functions directly from the headset using
the headset’s Call Control button so calls can be answered and ended remotely from the
headset.
inStallatiOn
Connect the audio cable from the headset base to the headset port on the telephone as
shown in the diagram (required for LD hookswitch control); then connect the RD-1 POD
as shown.