Plantronics CA10, Руководство пользователя, Страница: 11 / 19

11
INSTALLATION AND OPERATION
SETUP
Connect the CA10 to your telephone using the illustrations on pages 8 and 9.
Unplug the handset from your telephone’s base and insert into the handset jack
(24)
on the underside of the CA10 Base Unit.
Using the short cord
(26)
provided, plug the CA10 into the Telephone Jack.
(25)
Now connect the AC Power Supply
(21)
to the CA10 base
(22)
and into a wall
outlet. The Power LED will light after connected, but the In-Use Indicator Light
(14)
will remain off.
Attach the Remote Unit to the Battery Pack. The Remote and Battery slip together
easily and gently snap in place. Do not force. Connect your Headset to the Remote
Unit.
If you are using a headset whose cable terminates in a QD module, you will need the
QD to 2.5mm Headset Adapter Cable (P/N 43446-02)
Gently slide the Remote Unit and Battery Pack into the Base Unit Charging Well
(19)
unit the Battery Charge Light
(15)
is on (Charge indicator light on). Prior to
first use, the Battery must charge for 8 hours. The Charge LED will turn off after the
battery is fully charged.
You are ready to make or receive calls.
Note :
Remote Unit must remain in the Base for 5-seconds to establish a
communications link before the system can function.
A single-beep indicates the Remote or Base Unit has been turned on.
A double-beep indicates the Remote Unit Battery is low.
G
A
B
C
C