12
6
To use mobile phone away from PC, disconnect the USB cable from the inline controller.
7
End the call by pressing the mobile talk button.
TIP
For iPhone users, the headset battery level is displayed on the iPhone home screen. The headset
must be connected to the iPhone.
The call does not end if you remove your headset without pressing the mobile talk button. See
Advanced features
.
Pair a new device
Starting from the off position, press and hold the mobile talk button until it flashes red and blue.
Then follow step 3 in “
Pair and make a call with your mobile phone
” in the previous section.
NOTE
You can only pair one device at a time.
Charge your headset
When your headset is connected to the PC the headset will automatically charge if needed.
NOTE
Your new headset has enough power to make a few mobile calls before charging is needed.
The mobile talk button will be solid red when charging and off when fully charged. A full charge will
take approximately two hours. When a fully charged headset is disconnected from the PC there is
enough power to make four to five hours of mobile calls before charging is needed. Reconnect the
headset to the PC to charge the headset.
NOTE
Always charge at near room temperatures; never charge battery at temperatures below 0º C
(32ºF) or above 40º C (104ºF).
