15. Next mount the MicroACTs in the wing cutouts. and 2 each MicroACTs. Using the supplied pushrods
and ends, install pushrods. The actuators are a tight press fit and should not require any glue.
16. Adjust pushrod lengths until the surface are in their neutral positions when the actuators are center.
To fix, put a small drop of Ambroid (or Duco, Sigment) glue on the pushrods to keep the “Z” bend and
figure “4” from moving.
17. Install the 7mm motor in the motor slot. Set at 0° – 0° or slightly to the right (see picture). If you use
Foam Friendly CA, be careful not to get any into the motor!
18. Performance can be improved if prop is modified to the blade shape shown and then balanced. Your
Micro Racer P-51 is now ready for flight. After test flying, you may need to adjust the right thrust to
equalize the left and right turning performance.
Watch Video of the MicroRacers Kit assembly at:
http://www.plantraco.com/hobbies/video.html
Download the latest Instruction Manual version at:
http://plantraco.com/manuals
http://www.microracers.com
We’ll be making updates to this manual soon
Special Thanks to BSD Designs – designers of the Micro Racers Airframes
If you have problems or questions – Email
or call Plantraco 306-955-1836
