Planmeca Sovereign Classic, Руководство пользователя

Страница: 134 / 298

NOTE
You can program the dental unit so that you can switch the operating light's
composite mode on or off by pressing the Flexy button. For instructions, see
section "Flexy button functions" on page 198.
Foot control: The foot control can be programmed so that you can switch the
composite mode on and off from the foot control. For programming
instructions, see section "Foot control functions" on page 200.
23.6.5 Adjusting intensity of operating light
The intensity adjustment range is from 30% to 100%.
Each time you adjust the intensity, the direction of the adjustment (increase/
decrease) changes. Thus, if you first increase the intensity, the intensity will
be decreased the next time you adjust it.
You will hear short successive clicking sounds while the intensity is being
adjusted and a long signal tone when the maximum/minimum intensity is
reached.
The operating light intensity can also be programmed, see section
"Planmeca Solanna and Planmeca Solanna Vision operating lights" on page
191.
NOTE
The operating light intensity will decrease to 30% of the maximum intensity
when the chair is moving.
NOTE
When the polymerisation light is taken from the holder and returned to it, the
composite mode is switched on. This feature is configurable; contact your
Planmeca dealer.
From operating light
From one handle
Press and hold the handle button on either handle to adjust the intensity of
the operating light. The intensity increases/decreases for as long as you
press the button.
23 Operating dental unit
124 Planmeca Sovereign Classic User's manual