Planmeca Chairside PlanCAD Easy, Руководство пользователя

Страница: 112 / 180

20 BRIDGES
106 Planmeca Chairside CAD/CAM solution User’s manual
20.3 Bridge orientation
Set the orientation for each tooth tab. Good alignment will
aid Autogenesis with the design.
20.4 Drawing pontic margins
A margin is drawn for each tooth in the bridge.
1. Click the tooth number tab for each abutment and draw
the margin on the selected tooth.
An edentulous space does not technically have a margin.
The margin is drawn to aid the design process.
2. Click Trace and designate the position and extension of
the base of the pontic on the gingival tissue to fit the
appropriate contour.
NOTE
Do not go too far down the curve of the gingival tissue or
you may not be able to fit the bridge in the block.