Page
5
sur
14
2.2.4. Sleep
Scroll to “Delay” to enter the idle time (min) after which the FISHGUN D1 will enter
sleep mode.
Turn off the FISHGUN D1 by scrolling to "Enter" and pressing
✔
to confirm.
2.2.5. Light
This submenu allows you to set the color ("Color") and intensity ("Delivery") of the
indicator light at the front of the FISHGUN D1, that confirms each delivery of feed.
When the "Color" submenu is selected, these choices are available: Red, Magenta,
Yellow, White, Blue, Green, Cyan, or None.
In the "delivery" sub-menu, you can choose the intensity of a value of 1-100%.
III. Installation of the tube
Remove the cap on the conical bottom of the tube
and position the filled tube on the tube holder,
taking care to place the graduations upward so
that the dispensing aperture points downward.
Next, select the distribution mode.
IV. Docking to the fish tank
Position the FISHGUN D1 dispensing aperture over the aquarium’s feeding port,
making sure to place the triggering fork on the feeding port (TECNIPLAST).
For optimal reading of the RFID code, it is important to position the RFID antenna on
the front of the FISHGUN D1 close to the NFC tag.
