Now we will start with the wiring part. Take the rear panel and screw all the connectors to it. Let it
aside.
Take now the wire and solder it to the the PCB. If you have not purchased a kit you will need
shielded cable with to wires plus ground. Follow the schematic to solder the cable. The CV
connections will need the 2 wires plus the ground. The rest of the connectors will need only one
wire and the ground, so you can cut the black one.
There is an errata on the silkscreen. At the CV2 port "sw" and "tip" pads are swaped.
