Planex URS-02, Руководство пользователя

Страница: 14 / 16

URS-02
18 17
How to Attach URS-02 to a WindowsCE device
This section describes how to connect a Windows CE computer to a PC via
URS-02.
1. Turn on the power of the PC to which URS-02 has been already installed.
Then set WindowsCE Installer CD-ROM to the PC, and install
WindowsCE Service. For more details on this step, please refer to your
WindowsCE Manual.
2. When installation is complete, the system prompts the user to connect the
two devices through a serial cable. Use the serial cable that came with
the WindowsCE device to connect a hand-held PC to the computer.
Note:
Be sure to use the serial cable that came with the hand-held PC. If the
connector of the serial cable is the 9-pin type, please use the serial adapter
included in the package.
Appendix B
How to Attach URS-02 to a Windows CE device
3. Click on the "Start" button. The PC automatically scans its COM ports to
detect the port that leads to the WindowsCE PC. As soon as a link is
established between the two PCs, the cable connection icon is displayed
on the task tray of task bar. For more details on this step, please refer to
your WindowsCE manual or user's guide that came with your hand-held
PC.
Note:
●
If a link is not established, please check whether 1)the COM port is set to
19,200 bps OR 2)its speed is equal to the speed set to the WindowsCE
PC. A slow-down problem may occur if the speed is set to 38,400 bps or
greater.
●
While there is a link between the PC and the hand-held PC, please do not
remove the USB cable connected to URS-02. If you did remove the
cable, make sure to restart the PC.
●
Please do not remove the USB cable or the serial cable 1) during file
transfer and/or 2) while the two PCs are being synchronized.