SWP-0412/0420G Series L2 Managed Switch User’s Guide
64
[IP Address/Network Mask]
Displays the static IP address for the switch. This IP address is used for
manageable purpose, i.e.; network applications such as, http server, SNMP
server, ftp server , telnet server and SSH server of the switch are all using this
IP address.
CLI command:
net interface ip sw0
< IP address> <netmask>
[Default Gateway]
Displays the IP address of the default gateway. This field is necessary if the
switch network contains one or more routers.
CLI command
: net route static add
<destination subnet/IP> <gateway>
<netmask> <metric>
[Password Protection is]
[Enabled/Disabled
]
When the password protection
is enabled, the web interface will request a user
name
and password authentication while user accesses the switch through the
browser.
CLI command :
sys weblogin set
<enable/disable>
[New/Modify Password]
The default user name is
admin
. By default, a password is password. You
may set a password by configuring these fields.
CLI command :
sys users modify
<user name, ‘admin’ by default>
user name
(
old user name, ‘admin’ by default
)
:
<new user name>
password
(old password, ‘password’ by default):
<new password>
privilege level(Only 3 is supported):
(enter key)
[Reboot]
User can reboot the switch by issuing the reboot command.
CLI command
: sys reboot
Содержание SWP-0412G
