With WEP key
For TI-Based WLAN devices
For TI-Based WLAN devices with WEP key
Hidden Network
Mode
Displays the type of Basic Service Set, Access Point or Peer to Peer.
Ch
Displays the channel that is currently in use.
Signal
Displays the signal strength of the connection between the Wireless Network
Adapter and the Access Point it connects to.
BSS ID
A set of wireless stations is referred to as a Basic Service Set (BSS). Computers
in a BSS must be configured with the same BSS ID.
Current Configuration
Pref. SSID
It shows the current SSID setting of the Wireless Network Adapter.
BSS Type
Displays the type of Basic Service Set, Access Point or Peer to Peer.
Channel
Shows the selected channel that is currently used. (There are 14 channels
available, depends on the country.)
Tx Rate
Shows the current transfer rate.
Signal Quality
Displays the signal strength of the connection between the Wireless Network
Adapter and the Access Point it connects.
BSSID
The BSSID of the Access Point to which the card is associated
Connect
Highlight one of the devices from the list area and press the Connect button to
access it.
Modify
There will be two tabs for you to modify.
Rescan
Searches for all available networks. Clicking on the button, the device will start to
rescan and list all available sites.
Modify
19
