38
1.
Enable RIP:
Check this to enable the RIP (Routing Information
Protocol) feature of the Broadband Router.
The Broadband Router supports RIP 1 only.
2.
Static Routing Table:
This list shows all entries in the Routing
Table.
The "Properties" area shows details of the selected item in the
list.
Change any the properties as required, then click the "Update"
button to save the changes to the selected entry.
3.
Destination Network:
The network address of the remote LAN
segment. For standard class "C" LANs, the network address is
the first 3 fields of the Destination IP Address. The 4th (last) field
can be left at 0.
4.
Subnet Mask:
The Network Mask for the remote LAN segment.
For class "C" networks, the default mask is 255.255.255.0
5.
Gateway IP Address:
The IP Address of the Gateway or
Router which the Broadband Router must use to communicate
with the destination above. (NOT the router attached to the
remote segment.)
6.
Metric:
The number of "hops" (routers) to pass through to reach
the remote LAN segment. The shortest path will be used. The
default value is 1.
7.
[Add]:
Add a new entry to the Static Routing table, using the
data shown in the "Properties" area on screen. The entry
selected in the list is ignored, and has no effect.
8.
[Update]:
Update the current Static Routing Table entry, using
the data shown in the "Properties" area on screen.
9.
[Delete]:
Delete the current Static Routing Table entry.
10.
[Clear Form]:
Clear all data from the "Properties" area, ready
for input of a new entry for the Static Routing table.
11.
[Generate Report]:
Generate a read-only list of all entries in
the Static Routing table.
