Planex BLW-04G, Руководство пользователя

Страница: 19 / 51

- 10 -
the router are used by the internal LAN. The default values are
192.168.1.1 for the IP Address and 255.255.255.0 for the Subnet
Mask.
Wireless
Check “Disable”, “11g & 11b” or “11g” to make the wireless LAN
function active or select to support 11b/11g mixed mode or 11g only.
y SSID As
the acronym for Service Set Identifier , ESSID is the unique
name shared among all clients and Wireless Broadband Router in a same
wireless network. The ESSID must be identical for all points and must not
exceed 32 characters.
y
Channel Select the appropriate channel number from the drop-down.
The permissible channels are different from Regulatory Domains.
Make sure that all nodes in the same wireless LAN network use the
same channel, or the channel usage is automatic when a connection
between client and access point are made.
y WEP As
the acronym for Wired Equivalent Privacy , WEP is an encryption
mechanism used to protect your wireless data communications. WEP uses
a combination of 64-bit/128-bit keys to encrypt data that is transmitted
between all points in a wireless network to insure data security. To
code/decode the data transmission, all points must use the ident
ical key.
To make the WEP encryption active or inactive, select “Mandatory”
or “Disable ”.
y WEP Key Setting As the WEP is active, click the button of “Edit
WEP Settings” to go to the setting page.
y Data Encryption(WEP) Select “64(40)Bit ” or “128Bit” encryption
algorithm from the drop-down list.
y Network Key 1~4 You can enter the WEP key manually. You may
need to enter the WEP key manually in case to join the existing
wireless network. If you are not sure which Key to use, check with
your network administrator.
y
Current Network Key Select one of the four keys to be the
encryption key you are going to use in the wireless network. To be
sure that all the points in a same wireless network have to have the
same encryption key.