manualshive.com logo in svg

Planet XGSW-28040HP, Руководство пользователя

Поделиться
Скачать
Planet XGSW-28040HP Скачать руководство пользователя страница 247

User’s  Manual  of  XGSW-28040HP 

 

 

247 

 

Global Configuration 

These setting are common for all of the RADIUS Servers. 

Object 

Description 

 

Timeout 

Timeout is the number of seconds, in the range 1 to 1000, to wait for a reply from 

a RADIUS server before retransmitting the request.   

 

Retransmit 

Retransmit is the number of times, in the range 1 to 1000, a RADIUS request is 

retransmitted to a server that is not responding. If the server has not responded 

after the last retransmit it is considered to be dead. 

 

Dead Time 

The Dead Time, which can be set to a number between 0 and 3600 seconds, is 

the period during which the switch will not send new requests to a server that has 

failed to respond to a previous request. This will stop the switch from continually 

trying to contact a server that it has already determined as dead. 

Setting the Dead Time to a value greater than 0 (zero) will enable this feature, but 

only if more than one server has been configured. 

 

Key 

The secret key - up to 63 characters long - shared between the RADIUS server 

and the switch. 

 

NAS-IP-Address 

The IPv4 address to be used as attribute 4 in RADIUS Access-Request packets. 

If this field is left blank, the IP address of the outgoing interface is used. 

 

NAS-IPv6-Address 

The IPv6 address to be used as attribute 95 in RADIUS Access-Request 

packets. If this field is left blank, the IP address of the outgoing interface is used.

 

NAS-Identifier 

The identifier - up to 253 characters long - to be used as attribute 32 in RADIUS 

Access-Request packets. If this field is left blank, the NAS-Identifier is not 

included in the packet. 

 

Server Configuration 

The table has one row for each RADIUS Server and a number of columns, which are: 

Object 

Description 

 

Delete 

To delete a RADIUS server entry, check this box. The entry will be deleted during 

the next Save. 

 

Hostname 

The IP address or hostname of the RADIUS server. 

 

Auth Port 

The 

 

Acct Port 

The 

Содержание XGSW-28040HP































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды