15
•
The client request is made when the client device starts up.
•
The DHCP Server provides the
Gateway
and
DNS
IP addresses to the client, as well as allocating an IP
Address.
•
The WRT-413 can act as a
DHCP server
.
•
Windows 95/98/Me and other non-Server versions Windows OS will act as a DHCP
client
. This is the
default Windows setting for the TCP/IP network protocol. However, Windows uses the term
Obtain an IP
Address automatically
instead of "DHCP Client".
•
You can NOT have two (2) or more DHCP Servers on the same LAN segment. In one LAN, only one DHCP
Server can exist to assign IP address to the clients.
Using the WRT-413's DHCP Server
The DHCP Server settings are on the
LAN
option. In this option, you can:
•
Enable or Disable the WRT-413's
DHCP
Server
function.
•
Set the range of IP Addresses that will allocate to clients by this DHCP Server.
You can assign Fixed IP Addresses to some devices
while DHCP Server enable, please make sure the Fixed
IP addresses are NOT within the IP range which used by
the DHCP Server.
Using another DHCP Server
If you wish to use another DHCP Server, rather than the WRT-413's, the following procedure is required.
1. Disable the DHCP Server fn the WRT-413. This setting is on the LAN screen.
2. Configure the DHCP Server to provide the WRT-413's IP Address as the
Default Gateway
to the clients to
access Internet.
To Configure your PCs to work with DHCP Server
The default setting under Windows TCP/IP network is a DHCP client. Please check
Chapter 4 - Client Configu-
ration
for the procedure to check these settings.
Содержание WRT-413
Страница 1: ...i 802 11g Wireless Broadband Router WRT 413 User s Manual...
Страница 6: ......
Страница 33: ...27 Figure 19 Windows NT4 0 DNS...
