Direct Link Setup Enable
Enable or disable direct link setup (DLS) function. This function
will greatly improve the data transfer rate between WMM-enabled
wireless devices. Please click ‘Apply’ button on the right of this
check box after you check or uncheck this box, so corresponding
settings in this window will be activated or deactivated
respectively.
MAC Address
Input the MAC address of another WMM-enabled wireless device
you wish to establish a direct link here, then click ‘Apply’ to add
this MAC address to DLS address table.
Timeout Value
Input the timeout value of this WMM-enabled direct link wireless
device. If the wireless device is not responding after this time, it
will be removed from DLS table.
Tear Down
If you want to remove a specific wireless device from DLS table,
select the device and click this button to remove it.
Note: This function is not support in the OS of Windows VISTA.
- 25 -
