Chapter 5 Management Page 41
User Name
Specify a user name for the SNMPv3 administrator or user. Only the SNMP commands carrying
this user name are allowed to access the WNAP-6300.
Password
Specify a password for the SNMPv3 administrator or user. Only the SNMP commands carrying
this password are allowed to access the WNAP-6300.
Confirm Password
Input that password again to make sure it is your desired one.
Access Type
Select “
Read Only
” or “
Read and Write
” accordingly.
Authentication Protocol
Select an authentication algorithm. SHA authentication is stronger than MD5 but is slower.
Privacy Protocol
Specify the encryption method for SNMP communication. None and DES are available.
None
: No encryption is applied.
DES
: Data Encryption Standard, it applies a 58-bit key to each 64-bit block of data.
5.2 Password
From “
Password Settings
” in “
Management
”, you can change the password to manage your
WNAP-6300.
Enter the new password respectively in “
New Password
” and “
Confirm Password
” fields; click
“
Apply
” to save settings.
