5.4.4 Access
Control
WMRT-414 provides MAC Address Filtering, which prevents the unauthorized users from accessing your
wireless network.
Parameters
Description
Enable Wireless
Access Control
Enable or disable the MAC Address Filtering function.
Add MAC Address
to the control table
In the bottom “New” area, fill in the “MAC Address” and “Comment” of the wireless
station and then click “Add”. Then this wireless station will be added into the “MAC
Address Filtering Table” above.
Remove MAC
address from the
table
If you want to remove some MAC address from the “Current Access Control List”,
select the MAC addresses you want to remove in the list and then click “Delete
Selected”.
Delete All
If you want remove all MAC addresses from the list, just click this button.
Reset
Click “Reset” will clear your current selections.
After configuration complete, please click “Apply” button to save the configuration. Then you will see a
screen to prompt you the settings are save successfully. You may press “Continue” for configure other
settings or “Apply” to restart WMRT-414 with new configuration.
- 41 -
