- 10 -
10
3.1 Link Info.
The default page is as below after you launch the configuration utility. It displays the current link
status of WL-8314. You may press the
“
Radio off
”
button if you want your wireless PCI adapter to
stop working. After the wireless PCI adapter stops working, the
“
Radio off
”
button will be
renamed to
“
Radio on
”
. Click it if you would like to get your wireless PCI adapter back to work. If
you have connected to a certain Access Point, pressing
“
Rescan
”
button enables the wireless
PCI adapter to rebuild the link with the Access Point.
1. Status:
It shows the BSSID associated with, which can be used to identify the wireless network.
2. SSID:
It shows the current SSID, which must be the same for the wireless client and AP in order
to establish the link.
3. TxRate:
It shows the current data rate for transmission.
4. Channel:
It shows the current channel for communication.
5. Link Quality:
It shows the link quality of WL-8314 with the Access Point when operating in
Infrastructure mode.
6. Signal Strength:
It shows the signal strength of the wireless connection between WL-8314 and
the Access Point.
