- 60 -
Actor:
oneself device.
Partner:
link partner device.
Admin:
Switch default value.
Oper:
user setting and aggregating result.
Priority:
System priority value.
MAC Address:
Switch
’
s MAC Address.
Key:
aggregating key:
100 serial is LACP static trunking.
60000 serial is LACP dynamic trunking. I.e:101: 100MB group 1
’
s LACP static trunking, 102:100MB
Group 2
’
s LACP static trunking. 60010: 10MB LACP dynamic trunking.
Port Priority:
always is 1.
Port State:
Active:
ON: active status. OFF: passive status.
Timeout:
ON: short timeout ( 30 sec.). OFF: long timeout ( 90 sec.).
Aggregation:
ON: this link to be aggregating able. OFF: this link to be individual.
SYNC:
ON: synchronization status, it has been allocated to the link aggregation information.
OFF: asynchronization status, it
’
s not in the correct aggregation.
Collect:
ON: enable collection of incoming frames. OFF: disable collection of incoming frames.
Distribute:
ON: enable distribution of outgoing frames. OFF: disable distribution of outgoing frames.
Default:
ON: in default setting value, using admin configured for the partner. OFF: the operational partner
information for receive in a LACPDU.
Expired:
ON: the receive machine is in the expired state. OFF: the receive machine is not in the expired
status.
Speed:
display port link speed status.
Full-duplex:
display port link duplex status, LACP operation requires full-duplex mode.
LACP enable:
display LACP status.
Trunk enable:
display local trunk status.
Port enable:
display port status.
Содержание WGSD-1020
Страница 1: ...10 100 1000Mbps Intelligent Gigabit Fast Ethernet Switch WGSD 1020 User s Manual...
Страница 71: ...67 Figure 5 28 WGSD 1020 Tag based IEEE 802 1Q VLAN Help Web Page screen...
Страница 77: ...73 Figure 5 38 Spanning Tree Management Help Web Page screen Click Close to close this screen...
Страница 93: ...2080 000001 002...