It allows a maximum of four ports to be aggregated at the same time and up to 4 groups. If the group is defined as
a LACP static link aggregationing group, then any extra ports selected are placed in a standby mode for
redundancy if one of the other ports fails. If the group is defined as a local static link aggregationing group, then
the number of ports must be the same as the group member ports.
4.7 Security
4.7.1 VLAN
4.7.1.1 Theory
Understanding IEEE 802.1p Priority
Priority tagging is a function defined by the IEEE 802.1p standard designed to provide a means of managing traffic
on a network where many different types of data may be transmitted simultaneously. It is intended to alleviate
problems associated with the delivery of time critical data over congested networks. The quality of applications
that are dependent on such time critical data, such as video conferencing, can be severely and adversely affected
by even very small delays in transmission.
Network devices that are in compliance with the IEEE 802.1p standard have the ability to recognize the priority
level of data packets. These devices can also assign a priority label or tag to packets. Compliant devices can also
strip priority tags from packets. This priority tag determines the packet's degree of expeditiousness and
determines the queue to which it will be assigned.
Priority tags are given values from 0 to 7 with 0 being assigned to the lowest priority data and 7 assigned to the
highest. The highest priority tag 7 is generally only used for data associated with video or audio applications,
which are sensitive to even slight delays, or for data from specified end users whose data transmissions warrant
