to one of its communities. SNMP default communities are:
。
Write
= private
。
Read
= public
4.2.2.2 SNMP Configuration
To configure SNMP management, click on
System/SNMP
menu button, and the web main page changes to the
SNMP Management function, as shows in the following:
The followings are the description of the sub-table.
1. SNMP Agent Status Configuration
This block enables to turn on SNMP Agent.
Enabled / Disabled:
To turn on or turn off the SNMP function on the Switch.
2. System Options
This table is to define the system name, system location and the contact person of the switch. These informations
show in the SNMP software of the management workstation which helps to identify the switch that is looking into.
There are three fields in the
“system options”
configuration block:
。
System Name:
The system name of the switch which would show in the SNMP software.
。
System Location:
The system location of the switch which would show in the SNMP software.