6
3.2 Wall Mount Installation
Step 1
There are 4 holes with 8mm diameter on the wall; the distance between
the 2 holes is 133mm and the line through them must keep horizontal.
Step 2
Install a conductor pipe inside the board hole and flush the edge of the
conductor pipe with the wall surface.
Step 3
Screw the bolts into the conductor pipe. The WDAP-W7200AC is between
bolts and conductor pipe, as shown below.
5GHz
5GHz
10/100/1000T
PoE
Reset
WDAP-W7200AC
3.3 DIN-Rail Mounting Installation
The DIN-rail kit is included in the package. For the WDAP-W7200AC that needs to
be DIN-rail mounted, please refer to the following figures: