Enable Wireless Access Control
Enable or disable the MAC Address Filtering function.
Add MAC address into the table
In the bottom “New” area, fill in the “MAC Address” and
“Comment” of the wireless station, then click “Add”. This
wireless station will be added into the “MAC Address Filtering
Table” above.
Remove MAC address from the table If you want to remove a MAC address from the “MAC Address
Filtering Table”, select the MAC address in the table and then
click “Delete Selected”. If you want to remove all MAC
addresses from the table, just click “Delete All” button.
Reset
Click “Reset” will clear your current selections.
After configuration complete, please click “Apply”
button to save the configuration. Then you will
see a screen to prompt you the settings are save successfully. You may press “Continue” for
configure other settings or “Apply” to restart WAP-4035 with new configuration.
3.7 System
Utility
In this page, you can define the Access Point’s IP Address, Login Password and enable the
DHCP Server feature.
33
