- 12 -
confirm. Click on "Apply" to execute the password change. The Password is case-sensitive, and can
be made up of any keyboard characters. The new password must be between 0 and 15 characters
in length.
MAC Filters:
Filter function is for the administrator to authorize who can gain network access
through the Access Point by using MAC address filtering. By choosing the Allow radio button, only
MAC addresses in the Authorization table will be allowed to communicate with the Access Point. By
choosing the Deny radio button, any MAC address in the table will be denied association with the
Access Point. You can have up to 50 MAC addresses configured on it.
3.1.7 802.1x
This screen enables you to configure 802.1X authentication.
Enable/Disable:
Enable or disable 802.1X authentication of WAP-1965.
Encryption Key:
Select one of the Encryption key length options. It should be set the same length
as WEP key. Select one of the Encryption key lifetime options. Once the lifetime expires, the
Encryption key will be renewed by RADIUS server.
RADIUS Server 1:
Enter the IP address, communicate port number, and shared secret key of your
primary RADIUS server.
RADIUS Server 2:
Enter the IP address, communicate port number, and shared secret key of your
secondary RADIUS server.
Note:
As soon as 802.1X authentication is enabled, all the wireless client stations that are connected
to the AP currently will be disconnected. The wireless clients must be configured manually to
authenticate themselves with the RADIUS server to be reconnected.
