VIP-100T Quick Installation Guide
configuration menu. Default password is
“
x
”
(lower case).
(b) H.235 security:
Token password also can be used to setup RRQ/ARQ
authentication token password in Gatekeeper operation
environment. If VIP-100T wants to register to a GateKeeper,
which demands for H.235 security token feature, please
configure token password here. In most cases, you may get
the password from GateKeeper administrator. If GK
demands for H.235 authentication, VIP-100T can
’
t work
normally with this GateKeeper unless Token Password is
set.
(12) Management Center
This option is reserved for support service, please leave this
in default configuration (255.255.255.255)..
(13) GRQ Option
In GK operation environment, VIP-100T can find the GK via
auto discovery function. If this function is enabled and IP
address of GateKeeper is set as 255.255.255.255,
VIP-100T will multicast to search the GateKeeper on
network with configured GateKeeper ID (please refer to
(14)
Gatekeeper ID
); if IP address of GateKeeper is set, before
VIP-100T register to the assigned GateKeeper, it will send
out GRQ (GateKeeper Request) message with configured
GateKeeper name to GateKeeper first.
(14) GateKeeper ID
GateKeeper ID (name) is required for GateKeeper auto
discovery
function.
When
VIP-100T
sending
out
GateKeeper discovery message, it will search GateKeeper
with this configured GK ID, and register with User Line
Name, and number.
G
Hint
In GK operation environment, you
’
ll need to configure
one ID to complete the registration toward the
GateKeeper.
Содержание VIP-100T
Страница 1: ......
