- 6 -
- 7 -
- 5 -
3
1) Pick up phone and press
‘****’
to start IVR.
2) Choose
‘3’
and the VIP-1000PT/T reports on
WAN port subnet mask
.
3) Input a new WAN port subnet mask with
‘#’
at the end.
Use
‘*’
to replace
‘.’
. User can input
255*255*255*0
to set the new
WAN port subnet mask
255.255.255.0
.
Press the
‘#’
key to indicate that you have finished.
4) Report
‘operation successful’
if it’s done properly.
Note
If you want to quit, press
‘**’
.
4
1) Pick up phone and press
‘****’
to start IVR.
2) Choose
‘4’
and the VIP-1000PT/T reports on the current
gateway
.
3) Input the new gateway and end with
‘#
’.
Use
‘*’
to replace
‘.’
. User can input
192*168*20*1
to set the new
gateway 192.168.20.1.
Press the
‘#’
key to indicate that you have finished.
4) Report
‘operation successful’
if it’s done properly.
Note
If you want to quit, press
‘**’
.
5
1) Pick up phone and press
‘****’
to start IVR.
2) Choose
‘5’
and the VIP-1000PT/T reports on the current
DNS
.
3) Input the new DNS and end with
‘#
’.
Use
‘*’
to replace
‘.’
. User can input
192*168*20*1
to set the new
DNS
192.168.20.1
.
Press the
‘#’
key to indicate that you have finished.
4) Report ‘operation successful’ if it’s done properly.
Note
If you want to quit, press
‘**’
.
6
1) Pick up phone and press
‘****’
to start IVR.
2) Choose
‘6’
and the VIP-1000PT/T reports on
‘Factory reset’
.
3) At the prompt,
please enter password
. Please refer to Operation 1 for
the password input.
6
Note
If you want to quit, press
‘**’
.
4) Report
‘operation successful’
if password is right and then the
VIP-1000PT/T will be set to factory default.
5) Press ‘7’ to reboot to make changes effective.
7
1) Pick up phone and press
‘****’
to start IVR.
2) Choose
‘7’
and the VIP-1000PT/T reports on
‘Reboot’
.
3) At the prompt,
please enter password
. Refer to Operation 1 for the
password input.
4) The VIP-1000PT/T will reboot if password is right and operation is properly
done.
Note
If you want to quit, press
‘**’
.
8
1) Pick up phone and press
‘****’
to start IVR.
2) Choose
‘8’
and the VIP-1000PT/T reports on
‘WAN Port Login’
.
3) At the prompt,
please enter password
. Refer to Operation 1 for the
password input.
Note
If you want to quit, press
‘**’
.
4) Report
‘Operation successful’
if it’s done properly.
5) At the prompt, choose
1 (enable)
or
2 (disable)
and end with
‘#’
.
6) Report
‘operation successful’
if it’s done properly.
9
1) Pick up phone and press
‘****’
to start IVR.
2) Choose
‘9’
and the VIP-1000PT/T reports on
‘Web Access Port’
.
3) At the prompt,
please enter password
. Refer to Operation 1 for the
password input.
4) Report
‘operation successful’
if it’s done properly.
5) Report the current
Web Access Port
.
6) Set the new
Web access port
and end with
‘#’
.
7) Report
‘operation successful’
if it’s done properly.
0
1) Pick up phone and press
‘****’
to start IVR.
2) Choose
‘0’
and the VIP-1000PT/T reports on the current
‘Firmware
version’
.
4. NOTICE
In the Voice menu, press
*
(asterisk) to return to the up level menu.
If any changes are made in the IP assignment mode, please reboot the VIP-1000PT/T
to take effect the settings.
When entering IP address or subnet mask, input
‘*’
to represent
‘.’
and add
‘#’
to
finish inputting, for example, to enter the IP address
192.168.1.11
, press these
keys:
192*168*1*11#
.
You can enter the password by phone keypad, the matching table between numbers
and letters are as follows:
To input: A,B,C,a,b,c------press ‘2’
To input: D,E,F,d,e,f------press ‘3’
To input: G,H,I,g,h,i------press ‘4’
To input: J,K,L,j,k,l------press ‘5’
To input: M,N,O,m,n,o------press ‘6’
To input: P,Q,R,S,p,q,r,s------press ‘7’
To input: T,U,V,t,u,v------press ‘8’
To input: W,X,Y,Z,w,x,y,z------press ‘9’
To input all other characters in the administration password------press ‘0’.
Press
‘#’
(pound) key to indicate that you have finished entering the IP address or
subnet mask or other settings.
When assigning IP address in Static IP mode, customer must set IP address, subnet
mask and default gateway. If in DHCP mode, please make sure that DHCP server is
available in your existing broadband connection to which WAN port of VIP-1000PT/T is
connected.
Further Information
For further configuration, please refer to the user’s manual, which can be downloaded
from the website.
http://www.planet.com.tw/en/support/download.php?type1=372&model=48762&type=3
If you have any other question, please contact the dealer where you
purchased this product or you can contact PLANET directly at the
following email address: [email protected]
