background image

 

„

Trademarks

Copyright © PLANET Technology Corp. 2021
Contents subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. 
The information in this manual is subject to change without 
notice. All other trademarks belong to their respective owners.

 

„

Disclaimer

PLANET Technology does not warrant that the hardware will 
work properly in all environments and applications, and makes 
no warranty and representation, either implied or expressed, 
with respect to the quality, performance, merchantability, or 

fitness for a particular purpose.
PLANET has made every effort to ensure that this User’s Manual 

is accurate; PLANET disclaims liability for any inaccuracies or 
omissions that may have occurred.

Information  in  this  User’s  Manual  is  subject  to  change  without 

notice and does not represent a commitment on the part of 
PLANET. PLANET assumes no responsibility for any inaccuracies 

that  may  be  contained  in  this  User’s  Manual.  PLANET  makes  no 

commitment to update or keep current the information in this 

User’s  Manual,  and  reserves  the  right  to  make  improvements 
to  this  User’s  Manual  and/or  to  the  products  described  in  this 
User’s Manual, at any time without notice.
If  you  find  information  in  this  manual  that  is  incorrect, 

misleading, or incomplete, we would appreciate your comments 
and suggestions.

 

„

FCC Warning

This equipment has been tested and found to comply with the 
regulations for a Class A digital device, pursuant to Part 15 of 
the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference when the equipment 
is operated in a commercial environment. This equipment 
generates, uses, and can radiate radio frequency energy and, if 

not installed and used in accordance with this user’s guide, may 

Содержание vc-231





























Отзывы: