![background image](http://html.mh-extra.com/html/planet/pl-701/pl-701_user-manual_1562257021.webp)
The lower panel contains a history of all remote devices.
Devices are shown here regardless of whether or not they are on the same
logical network.
Device
Name
MAC
Address
Password
Rate(Tx/Rx)
Network
Last
Seen
Last Known Network
Chipset manufacturer name (Turbo Only devices)
Date device last scanned
3.5 Security Button
This section describes how to use Security button for configuration in the
following situations:
Establish a new security network (Network AB)
The procedure is as follows:
1. Press the security button on the Powerline (a) during 1~3 seconds.
2. Press the security button on the Powerline (b) during 1~3 seconds.
3. The PWR LEDs start to flash.
4. After a few seconds, the PWR and HP LEDs should be on. The connection of
Network AB is success.
21
Содержание PL-701
Страница 1: ...25 500Mbps Powerline Ethernet Bridge PL 701 ...
Страница 9: ...1 6 Wire Diagram 9 ...
Страница 13: ...This screen shows that the installation was completed successfully Click on Close to exit the wizard 13 ...
Страница 19: ... Note The DEK is unique for EACH Pow erline device To use this you will need to input the DEK for each unit 19 ...