Planet NOVASwitch GSW-800S Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 38

Planet NOVASwitch GSW-800S Скачать руководство пользователя страница 12

PLANET GSW-800S

12

*1

When the internal temperature is equal to or higher than 60

degree C, the standby fan will be drove to run and the

Over

Heat

LED will light on. Once the temperature is equal to or

higher than 70 degree C, the buzzer will sound. Users can
press the buzzer On/Off button to turn off the buzzer.

*2

There are two fans in the unit. Normally, only one of the fans

is running. Another fan is standby. Once the running fan is
failed, the standby fan will be drove to run and the

Fan

Failure

LED will light on.

2.1.5 GSW-800S Rear Panel

The rear panel of the GSW-800S has a Power Connector and two Fans
at the rear of the switch. Besides, a Buzzer ON/OFF button is placed
between. The power port is where you will connect the AC power cord.
(See Figure 2-3 of Rear Panel of GSW-800S)

Figure 2-3

Rear Panel of GSW-800S

Power Notice:

1. The device is a power-required device, it means, it will not work till it

is powered. If your networks should active all the time, please
consider using UPS (Uninterrupted Power Supply) for your device. It
will prevent you from network data loss or network downtime.

2.

In some area, installing a surge suppression device may also help
to protect your switch from being damaged by unregulated surge or
current to the Switch or the power adapter.

2.2 Installing a GSW-800S

This part describes how to install your GSW-800S Gigabit Ethernet
Switch and make connections to the switch. Please read the following
topics and perform the procedures in the order being presented.

PLANET GSW-800S Gigabit Ethernet Switch do not need software
configuration. To install your GSW-800S on a desktop or shelf, simply
complete the following steps.

«
...
10
11
12
13
14
...
»

Содержание NOVASwitch GSW-800S







































Отзывы:

Нет отзывов