5
Chapter 3 Setup Wizard
The Setup Wizard guides you to finish the initial installation of NAS-1100, and the basic
configurations for Network. Please follow the steps as below.
1. Insert the CD-ROM into the CD-ROM drive to initiate the autorun program. Once
completed a menu screen will appear.
2. Click on
“
Setup Wizard
”
hyper link to initiate the program. If the menu screen is not shown,
you can click the
“
Start
”
button and choose
“
Run
”
. When the box appears, enter
“
E:\Utility\setup.exe
”
(Suppose
“
E
”
is your CD-ROM drive). You will see the Welcome
screen as below. Please click
“
Next
”
to continue.
3. Plug the circle end of power adapter firmly into the rear panel of NAS-1100, and the other
end into a power outlet. Press the Power button on NAS-1100 and make sure Power LED
is light on.
