manualshive.com logo in svg

Planet Multi-Port Fast Ethernet Print Server FPS-3121, Руководство пользователя

Поделиться
Скачать
Planet Multi-Port Fast Ethernet Print Server FPS-3121 Скачать руководство пользователя страница 19

C h a p t e r 4   Wi n d o w s   N e t w o r k  

4.1     System Architecture 

In Windows network environment, other than the Peer-to-Peer network printing architecture 
described in the previous chapter, we also offer the Server-Based Printing architecture for 
Windows NT/2000/XP/2003 server. Only one Windows NT/2000/XP or 2003 Server is required to 
have Windows PTP (Peer-to-Peer) driver installed and share the printing service on the network. 
Other network users can simply connect to the server and access the shared printer. (see below) 

4.2     Windows Server Installation and Setup 

Please follow the procedures described below for installation and construct a peer-to-peer 
connection (PTP) between Windows NT/2000/XP/2003 Server and Print Server. 

 

Step1. 

Please install the administrator software on Windows Server. You may refer to section 3.2 for 
installation instructions. 

Step2. 

Please add/configure the Peer-to-Peer Printing of the Windows network printer and verify that 
you can print from Windows Server to the print server by the installed PTP driver. 

Step3. 

Share the Windows Server’s printer to the network by performing the standard Windows 
printer sharing process. 

4.3     User Installation and Setup 

After server side’s installation is completed, client side will be able to find the server’s shared 
printer in Network Neighborhood. You only need to perform Window’s standard 

Add New Printer

 

procedure, select 

“Network Printer”

 shown in the screen below, and complete the configurations 

afterwards to access the shared printer. 
 

 

Содержание Multi-Port Fast Ethernet Print Server FPS-3121


























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды