Planet IVC-2002 Скачать руководство пользователя страница 25

Страница: 25 / 28

5. FAQ

Q1:

What Power Input that IVC-2002 used?

A1:

12 ~ 48V DC

Q2:

What is VDSL2?

A2:

VDSL2 (Very High-Bit-Rate Digital Subscriber Line 2), G.993.2 is

the newest and most advanced standard of xDSL broadband wire
line communications.

Designed to support the wide deployment of Triple Play services

such as voice, data, high definition television (HDTV) and inter

active gaming, VDSL2 enable operators and carrier to gradually,

flexibly, and cost efficiently upgrade exiting xDSL-infrastructure.

Q3:

What is the best distance for IVC-2002?

A3:

In order to guarantee the stability and better quality of network,

so we would suggest the distance within 1.4 kilometer is the best
for RJ-11 Connecting and 2.4 kilometer for BNC Connecting.

Q4:

What is the best date rate for IVC-2002?

A4:

We provide the data rate of the IVC-2002 is up to:

99Mbps/63Mbps for RJ-11 Connecting and the BNC Connecting is
up to 99Mbps/65Mbps (downstream / upstream) in 200 meters

Q5:

Can IVC-2002 compatible with VC-201A / VC-202A?

A5:

YES, IVC-2002 (profile 17a) and VC-201A / VC-202A (profile 17a)

are base on ITU-T G.993.2 VDSL2 with same Profiles, so far they

are compatible with each other.

Содержание IVC-2002





























Результаты поиска

Содержание IVC-2002

Отзывы:

Planet IVC-2002, Руководство пользователя, Страница: 25 / 28

Результаты поиска

Содержание IVC-2002

Отзывы: