20
2.2 Mounting Installation
This section describes how to install the Industrial Fast Ethernet Switch
and make connections to it. Please read the following topics and
perform the procedures in the order being presented.
Note
In the installation steps below, this Manual uses
IGS-801 (PLANET 8-Port Industrial Gigabit Switch) as
the example. However, the steps for PLANET Industrial
Switch and Industrial Media Converter are similar.
2.2.1 Install DIN-Rail Mounting
The DIN-Rail is screwed on the Industrial Gigabit Ethernet Switch when
out of factory. When needed to replace the wall mount application with
the DIN-Rail application on Industrial Gigabit Ethernet Switch, please
refer to the following figures to screw the DIN-Rail on the Industrial
Gigabit Ethernet Switch. To hang the Industrial Gigabit Ethernet Switch,
follow the steps below:
Step 1:
Screw the DIN-rail on the Industrial Fast Ethernet Switch.
Содержание ISW-511 Series
Страница 23: ......