User’s Manual
4.3 System
The System function allows viewing System information, IP Configuration, Password Setting and etc.
As shown in
Figure 4-3
and description on
Table 4-3
Figure 4-3
System Screen
The page includes the following information:
Object
Description
System Information
Display the MAC address, Software Version, Hardware Version, IP address, Subnet
Mask and Gateway.
Explained in section 4.3.1
IP Configuration
Allow to change the IP subnet address of Switch.
Explained in section 4.3.2
Password Setting
Allow to change the username and password of Switch.
Explained in section 4.3.3
Firmware Upgrade
Allow proceed firmware upgrade process of Switch.
Explained in section 4.3.4
Configuration Setting
Allow to restore / backup configuration of Switch and reset Switch to factory default.
Explained in section 4.3.
Configuration Backup
Allow to download / upload the configuration file of Switch.
Explained in section 4.3.6
Managed IP
Allow to set the specific IP address to access the Web Smart Page.
Explained in
section 4.3.7
Fault Relay Alarm
Monitor the Power 1 and 2.
Explained in section 4.3.8
Alert Trap Configuration
Set up SNMP trap receiver’s IP address and trap event.
Explained in section 4.3.9
System Reboot
Allow reboot the Switch.
Explained in section 4.3.10
Table 4-3
Descriptions of the System Column
-31 -
