15
Step 5:
Lightly pull out the bottom of the switch for removing
it from the track.
5.2 Wall-mount Plate Mounting
To install the Industrial Ethernet Switch on the wall, please
follow the instructions described below.
Step 1:
To remove the DIN rail from the Industrial Ethernet
Switch, loosen the screws.
Step 2:
Place the wall-mount plate on the rear panel of the
Industrial Ethernet Switch.
Step 3:
Use the screws to screw the wall-mount plate on the
Industrial Ethernet Switch.
Step 4:
Use the hook holes at the corners of the wall-mount
plate to hang the Industrial Ethernet Switch on the
wall.
Step 5:
To remove the wall-mount plate, reverse the steps
above.
