5
3. Wiring the Power Inputs
The Upper Panel of the
Media Converter
comes with one 6-contact
terminal block. Please follow the steps below to insert the power wire.
1.
Insert positive/negative DC power wires into Contacts 1 and 2 for
Power 1, or Contacts 5 and 6 for Power 2.
IGT-900-1T1S
and
IGT-900-2T2S
: DC 9-48V, AC 24V
Max. Fault Alarm Loading: 24V, 1A
DC Input: 9-48V , 1A max.
AC Input: 24V , 0.6A max.
V1+
V2+
PWR1
PWR2
Alarm
1 2 3 4 5 6
Figure 3-1:
IGT-900-1T1S/IGT-900-2T2S Upper Panel
2. Tighten the wire-clamp screws for preventing the wires from loos-
ening.
1
2
3
4
5
6
V+ V-
V+ V-
Power 1
Power 2
Positive (+) Pin
Negative (-) Pin
IGT-900-Series
Pin 1/5
Pin 2/6
Caution
PWR1 and PWR2 must provide the
same DC voltage
while operating with dual power input.
