7
4. Terminal Setup
To configure the system, connect a serial cable to a
COM
port on a PC or
notebook computer and to the RJ45 type of the console port of the Industrial
Managed PoE+ Switch.
Managed Switch
PC / Workstation
with
Terminal Emulation Software
Serial Port
RS232 to RJ45 Cable
Console Port
RJ45
Figure 4-1:
Industrial Managed PoE+ Switch Console Connectivity
A terminal program is required to make the software connection to the Industrial
Managed PoE+ Switch.
1. Run terminal program on the OS.
2. When the following screen appears, make sure that the COM port should be
configured as:
Baud:
115200
Data bits:
8
Parity:
None
Stop bits:
1
Flow control:
None
Figure 4-2:
COM Port Configuration
