7
4. Terminal Setup
To configure the system, connect a serial cable to a
COM port
on a PC or
notebook computer and to RJ45 type serial (console) port of the Industrial
Managed PoE+ Switch. The console port of the Industrial Managed PoE+ Switch is
DCE already, so that you can connect the console port directly through PC without
the need of null modem.
PC/Workstation
with
Terminal emulation software
RJ45 to DB9 RS232 Cable
Serial Port
IP Address:
192.168.0.100
IGS Industrial Managed Switch
Figure 4-1:
Industrial Managed PoE+ Switch Console Connectivity
A terminal program is required to make the software connected to the Industrial
Managed PoE+ Switch. Windows’ Hyper Terminal program may be a good choice.
The Hyper Terminal can be accessed from the Start menu.
1. Click
START,
then
Programs, Accessories
and then
Hyper Terminal
.
2. When the following screen appears, make sure that the COM port should be
configured as:
Baud: 115200
Parity: None
Data Bits: 8
Stop Bits: 1
Flow Control: None
Figure 4-2:
COM Port Configuration
