6
7
2.3 Back panel introduction
The real panel of ICF-1000S has three video inputs which can be used to connect to
external cameras for group meetings and/or a document camera for showing detailed
documents or photographs. It also provides 1 set of RCA AV output connector for
connecting to TV, projector or stereo.
The following table lists all the connectors on the back panel of ICF-1000P and their
function.
POWER
Connect to the DC output of power adapter.
NTSC/PAL Switch
Switch between NTSC, PAL.-M, PAL-B
NOTE: To use VGA out, please switch to PAL-M
VGA
By connecting with a monitor. ICF-1000S can use a monitor
as an alternative video output device.
NOTE: Please switch to PAL-M and set the bandwidth under
384Kbps to ensure the picture quality.
MIC
Microphone jack.
SPK
Speaker jack.
Audio Out
Output audio to TV.
Video Out
Output video to TV.
Video In
Input video from external device. ICF-1000S can connect
with up to three external cameras.
Ethernet
Connect to your local network or Cable/DSL modem. This
port supports both 10Mbps and 100Mbps speed
NOTE
1. The device is a power-required device, it means, the device will not
work until it is powered. If you need to use it all the time, please con-
sider use an UPS (Uninterrupted Power Supply) for this device.
2. In some area, installing a surge suppression device may also help to
protect your device from being damaged by unregulated surge or cur-
rent to the device or the power adapter.
