POP before SMTP:
Select if POP before SMTP authentication is necessary when an
e-mail is sent.
POP server name:
It is necessary when the
POP before SMTP
is selected in
Authentication
. Type the POP (receiving mail) server name up
to 64 characters, or type the IP address of the POP server. This
setting is necessary when the SMTP server which sends e-mails
performs authentication using the POP user account.
User name, Password:
Type the user name and Password of the user who has the mail
account. This setting is necessary when the SMTP server which
sends e-mails performs authentication.
Recipient e-mail address
Type the recipient e-Mail address up to 64 characters. You can
specify up to three recipient E-mail addresses.
Administrator e-mail
address
Type the Administrator e-Mail address up to 64 characters. This
address is used for reply mail and sending system messages
from the SMTP server.
Subject
Type the subject/title of the e-Mail up to 64 characters. With
respect to mail which is sent according to the alarm detection
when
Alarm sending
of the alarm tab is set to
On
, the
characters standing for the sensor type added to the subject.
Message
Type the text of the E-mail up to 384 characters. (A line break is
equivalent to 2 characters.)
Note:
When you set Authentication to
On
, be sure to select either or both
SMTP
or/and
POP before
SMTP
.
Dual Mode CCD Dome Internet Camera
57
